Saw Setting Dial Gauges | analogue
The advantages of having a correctly set saw for all sawing work are well known. By using a Saw Setting Dial Gauge any specified set for various kinds of timber can be exactly maintained, thus ensuring maximum output and efficient workmanship.
The method of measuring could not be simpler. The gauge is laid on the saw blade so that the sprung tracer touches the cutting edges of the saw. The pointer gives instant reading of the measurement. As the Gauge has a dial on both sides, it can be used either left or right handed.
For full specification click here: Saw_Setting_Dial_Gauges
| Type | Reading | Range per revolution | Range | Special Features |
|---|---|---|---|---|
| Sägeschränkmessuhr (Standard) | 0.1 mm | 1 mm | 2 mm | Contact Point Ø 10 mm, flat |
| Sägeschränkmessuhr H | 0.1 mm | 1 mm | 2 mm | Contact Point (Ø 10 mm, flat) + Supporting foot from carbide |
| Sägeschränkmessuhr K 2/42 | 0.1 mm | 1 mm | 2 mm | with shorten case |
| Sägeschränkmessuhr K 2/43 | 0.1 mm | 1 mm | 2 mm | with Supporting Plate |
| Sägeschränkmessuhr K 2/61 | 0.1 mm | 1 mm | 2 mm | 2 Supporting foot transverse to the case |
| Sägeschränkmessuhr K 3/30 | 0.1 mm | 1 mm | 2 mm | Spherical Contact Point |
| Sägeschränkmessuhr K2 (0.01 mm) | 0.01 mm | 1 mm | 2 mm | Reading 0,01 mm / Contact Point Ø 10 mm, flat |
| Sägeschränkmessuhr Modell B | 0.1 mm | 1 mm | 2 mm | Pointed Contact Point |
| Sägeschränkmessuhr Modell C | 0.1 mm | 1 mm | 2 mm | Contact Point Ø 4.8 mm, flat |
English 
Hungarian