VM-3000 Vacuum Cooling Mounting Press Machine
VM-3000 can exclude the air contained in the sample.Without the presence of air, the embedded compound would fill the sample’s gap, eliminating the gap between the sample and the compound. Therefore, edge retention is strengthened and fragile samples are well supported during grinding and polishing.
A sturdy vacuum pump provides enough vacuum to quickly remove any air in a porous sample. With the unique rotating cup holder in the vacuum container, multiple samples can be soaked in vacuum at the same time.
A unique casting mechanism is designed so that the embedded compound can be placed in the cavity and poured into the mold at one time.Can be applied to various epoxy resin and polyester castable inlay (cold) compounds.Since the sample is encapsulated in a vacuum, the possibility of air entering is completely eliminated.
Technical parameters:
| Item | Specification | Remark |
| Mould size | φ30mm silicon mould | Optional 40,50mm |
| Vacuum pump | Max vacuum degree:-0.1Mpa，
Pumping rate：7.2 m³/h |
|
| Input voltage and power | 单相220V，50/60Hz 370w | |
| Dimension | Vacuum container：300Lx 300W x 300H mm
Vacuum pump：340Lx 130W x 270H mm |
|
| Max. Quantity of samples | >10个 | φ30mm |
| Weight | Vacuum container：1.15kg
Vacuum pump：11.5kg |
Standard accessories：
|
Item |
Quantity |
Item |
Quantity |
|
Vacuum pump（with vaccum meter） |
1 |
100ml measuring glass |
1 |
|
Vacuum container |
1 |
CM4cold mounting resin Resin 200ML+curing agent60ml |
1 |
|
Connecting pipe |
1 |
Manual |
1 |
|
Mould （φ30mm silicon mould） |
3 |
certificate |
1 |
Hungarian 
English